Achieve a Custom Look with This DIY Technique for Your Cabinet Doors
Are you looking for a cost-effective way to add a unique touch to your cabinet doors? Adding a V groove with a circular saw is a great DIY technique that can create a custom look for your kitchen or bathroom. Here are the steps and products you'll need to get started:
Steps:
- Remove the doors and cover any holes with a multi-purpose filler, if you plan on adding new handles.
- Start your measurements where you want your V grooves to go and make sure each door matches.
- Using a circular saw with a 185mm blade, cut the grooves to a height of 3-4mm. It's important to note that this step should be performed by someone with experience.
- Sand both sides of the doors with a 400-grit wet and dry sanding paper to remove any lumps or hard bits.
- Clean the doors again to remove any dust.
- Apply one coat of primer and let it dry for 4 hours.
- Apply two coats of your chosen color, letting each coat dry for 8 hours in between.
- Finally, apply the topcoat and let it dry for 8 hours before touching it.
By following these simple steps and using the right products, you can create a unique look for your cabinet doors that will impress your guests and add value to your home.
Materials:
- Circular saw
- White Knight Tile and Laminate Paint
- 400 grit sanding paper
- Dulux Renovation Range Primer and Paint
- 100mm, 4mm nap rolled brush
- 50mm furniture brush
- Plastic tray
- Sugar soap
- Screwdriver
- Multi-purpose filler
By following these simple steps and using the right products, you can create a unique look for your cabinet doors that will impress your guests and add value to your home.
CREATOR: Mariana
Instagram: @lifestyleby_mari
